Teleco TVPLA868CC2EN Bedienungsanleitung Seite 9

Radio codes memorization
1.1
3.1
If the system is configured as pergola with 2 independent motors, it associates memorization procedure using P1 to motor 1 and memorization
procedure using P2 to motor 2. Note: the same radio code can in any case be associated with both motors.
In the other configurations memorization is possible using either P1 or P2.
TYPE OF MEMORIZATION
(see description page 8)
A
7/42 CHANNEL
TRANSMITTER
AUTOMATIC
B
COMMANDS
(2 or 3 BUTTONS)
HOLD-TO-RUN
C
COMMANDS
(2 or 3 BUTTONS)
D
GREEN MOUSE SCREEN
E
7/42 CHANNEL
TRANSMITTER (NO 0%)
Press P1 or P2 (**) as many times as required by the type of desired memorization and hold the last time. The buzzer emits a continuous sound.
Press the button of the transmitter relative to the code to be memorized. Successful memorization is indicated by the intermittent sound of the buzzer
* The buzzer will make a beep each time the button is pressed.
P1 or P2 **
*
2x
*
3x
*
4x
*
11x
*
12x
** According to the motor control mode
HOLD
9
continuous
sound
Press any button
of the 7/42 channel
transmitter
Press the button
of the transmitter
relative to the code
to be memorized.
Press the button
of the transmitter
intermittent sound
relative to the code
to be memorized.
Press the button
2 or 3 of Green
Mouse Screen.
Press any button
of the 7/42 channel
transmitter
P1 or P2
...