Sony BKM-220D Bedienungsanleitung Seite 6

Overview
The BKM-220D SDI 4:2:2 Input Adaptor is
a video signal input adaptor for Sony
professional monitors.
When installed in an input option slot on the
main unit, it provides video input and output
connectors for the main unit and a decoder
for serial digital component signals.
Function
Decoder for serial digital component
signals
The BKM-220D is equipped with a built-in
decoder for serial digital component (525/
625) signals.
Serial digital input and output signal
connector
The BKM-220D is equipped with two input
and one monitor output connectors for serial
digital signals.
Using the Input and Output
Connectors
For information about installing the BKM-
220D in an input option slot on the main
unit, see the operating instructions for the
main unit.
6
Configuration of Input/Output
Connectors and Signals that may be
Input
The configuration of the input and output
connectors, and the signals that may be input
are shown below.
1
1
2
INPUT
1
Input serial digital component signals.
2 Output serial digital component monitor
signals.
Input of serial digital component
signals
You can input serial digital signals to
connectors 1 and output signals displayed
on the screen of the main unit or the monitor
from connector 2.
You need not attach the 75-ohm termination
to connector 2.
Notes
• The MONITOR OUT signal is output only
when the power of the main unit is ON. The
MONITOR OUT signal is not output when
the monitor is in standby mode.
• The MONITOR OUT signal does not
comply with ON-LINE signal specifications.
2
BKM-220D
DIGITAL
MONITOR OUT