Sanus VisionMount XF228 Montageanleitung Seite 10

3
Attach Arm to Wall Plate
3-1
Align the holes
3-2
Secure the arm
[22]
4
Attach your TV to the Arm
4-1
Position the arm
(T)
[03]
4-2
Attach TV to the arm
[02]
[03]
(L)
10
Install the arm assembly [03] into the wall plate [01]. The pegs on the
002592.eps
top of the arm assembly fit into the slots of the upper sliding car. Be
XF228 - install arm
sure to align the bottom holes of the arm assembly with the holes in
the lower sliding car.
[01]
[03]
[01]
Secure the arm [03] to the wall plate [01] using hex key [29] and screw [22].
[01]
[03]
Position arms [03] so one elbow is pressed against the wall.
Tighten the tension adjustment (T) to prevent the arms from
moving while installing the TV bracket.
Attach the TV bracket [02] to the arm assembly [03]. There is an
audible click when the parts are correctly assembled.
[01]
[29]
[22]
6901-002115 <01>
[03]