Levita LT61B Gebrauchsanweisungen Seite 98

4. The engine does not start
5. The engine stops
6.
Starting is difficult or the
engine runs erratically
.
7
Weak engine performance
during cutting
8. Engine stops when blade is engaged
met(5.2.b)
9.
Unusual vibrations while working
.
10 Uncertain or ineffective braking
necessary equipment or the technical knowledge. The warranty is automatically voided and the
manufacturer is not held responsible if repairs are done badly.
– earth connections of the micros witches
disconnected
– you are not ready for starting
–earth connections of the micro switches
Disconnected
–fault in carburetion
–forward speed too high in relation to
cutting height
–you are not ready to engage the blade
–blade unbalanced
–blade loose
–fixing bolts loose
–the brake is not adjusted correctly
Do not take on complicated repair work if you don't have the
–check connections
–check that the conditions allowing the start
are met (☛5.2.a)
–check connections
–clean or replace the air filter
–flush out the float chamber
–empty fuel tank and refill with fresh fuel
–check and, if necessary, replace fuel filter
–reduce the forward speed and/or raise
the cutting deck (☛5.4.5)
–check that the safety requirements are
–Contact your dealer
–Contact your dealer
–check and tighten all the fixing bolts
of the engine and frame
–Contact your Dealer
-98-