Unpacking; Fitting The Steering Wheel - Levita LT61B Gebrauchsanweisungen

a flat and stable surface, with enough space for machine handling and its packaging,
always making use of suitable equipment.

3.1 UNPACKING

When unpacking the machine, take care to gather all the individual parts, fittings and
documentation.
down from the pallet, take it to the maximum height and be very careful.
The supply includes:
– Machine assembly
– Seat
– Steering wheel
– Engagement lever of blade
– Grass catcher
– the battery (already assembled to machine);
– bolts and screws, necessary for completing the assembly.
– pin for motor cover secure
Disposal of the packaging should be done in accordance with the local regulations in
force.

3.2 FITTING THE STEERING WHEEL

3
3.3 FITTING THE SEAT
1
3
Unpacking and completing the assembly should be done on
To avoid damaging the cutting deck when getting the machine
1
Put the machine on a flat surface and straighten up the
front wheels.
1. fit the steering wheel（1）onto the protruding shaft (2)
and fasten it
hole (4).
4
2
2
Fit the seat (1) onto the plate (2) using the screws (3)
3
by impacting the included pin (3) into the
-75-