Identification Of The Machine And Components; Unpacking And Assembly - Levita LT61B Gebrauchsanweisungen

2.1 IDENTIFICATION OF THE MACHINE
The identification label located under the seat has the essential
data of each machine.
DESCRIPTION OF MAIN COMPONENTS OF MACHINE
17
14
connecting the cutting deck to the grass-catcher.
14. Grass-catcher: as well as collecting the grass cuttings, this is also a safety element in
that it stops any objects drawn up by the blade from being thrown outside of the machine.
15. Engine: this moves the blade and drives the wheels. Its specifications and regulations
for use are described in a specific manual.
16. Batteries (only in the electric start models): provides the energy for starting the
engine. Its specifications and regulations for use are described in a specific manual.
17. Driver seat: this is where the machine operator sits. It has a sensor which detects the
presence of the operator and acts as a safety device.
18. Labels for regulations and safety: give reminders on the main provisions for
working safely, each of which is explained in chapter 1.
19. Engine cover: for access to the engine
For storage and transport purposes, some components of the machine are not installed in
the factory and have to be assembled after unpacking. Follow the instructions below.
starting the engine, fill with oil and fuel following the instructions given in the engine
manual.
19
15
18
16
13 12 11
The machine is supplied without engine oil or fuel. Before
The machine is composed of a series of
main component
11. Cutting deck: this is the guard enclosing
the rotating blade
12. Blade: this is what cuts the grass. The
wings at the ends help convey the cut grass
towards the collector channel.
13. Collector channel: this is the part
-74-