Spektrum IX20 Schnellstartanleitung Seite 8

Creating A New Model
1. Create a new model by touching the pen icon (
top left of the dashboard to access the Model Utilities
screen. If RF is on, the system will open a dialog box to
confi rm RF will be turned off to enter this menu. Touch and
hold PROCEED to continue.
2. Press on the expand icon ( ) at the top right corner of the
Model Utilities screen.
3. Select Add a New Model from the drop down menu.
4. Select Default.
5. Select the model type desired from Airplane, Helicopter,
Sailplane or Multirotor.
6. Select Create.
7. The model is added to the Model Utilities list and is now
the active model, indicated by an orange outline.
8. Touch and hold the back arrow (
dashboard.
TIP: Select the new model in the Model Utilities list to go to the
Model Details page for that model to access these features:
• Change Model Name
• Change Model Image
• Monitor Channel Count
• Edit Model Type
• Reset Model Timer
• Duplicate Model
Binding
Binding is the process of linking the iX20 transmitter to an
aircraft receiver. The iX20 is compatible with genuine DSM2
®
and DSMX Spektrum receiver products. The EU version of
the iX20 does not support DSM2 receiver products.
Access the Bind menu from the Model Setup menu or access it
directly by touching the BIND button on the Dashboard screen.
Touch Alerts to confi gure any alerts which occur during binding.
FCC and ISED Information
The iX20 transmitter FCC and ISED regulatory information is
available in the System Settings Menu.
1. Touch the System Settings button on any of the main
screens.
2. Touch Regulatory to open.
) at the
) to return to the
• Reset Model
• Delete Model
• Export Model
• Save As Template
• Model Note
®
8