Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Fig. 23
After the condensate drain pipe is engaged, it is possible to hook the vent cover with one hand, exerting moderate pressure.
Fig. 24
Perform the same operations also for the other air vent, except the nozzle fixing operations.
23
23
Click!
Fig. 25
After having fixed equipment inside the room, you can complete installation operations by inserting the front cover panel.
The panel should be attached by inserting the first two steel fins in the slits arranged at the bottom of the equipment.
Fig. 26
Complete front panel fixing by pushing it completely against equipment.
Fig. 27
Once the panel has been pushed to end stop on the equipment, lock it at the top by means of the two screws.
25
25
CAUTION:
In the initial phase of locking the cover panel, make sure that the panel itself stays in place (use a hand or
adhesive tape), thus avoiding the risk of it falling on the ground.
34
26
26
24
24
27
27
Werbung
Inhaltsverzeichnis
