Thermalright Le GRAND MACHO Bedienungsanleitung Seite 14

Installation Instructions:
Step 1:
Step 1 : Backplate Installation
Choose the platform (AMD) you are in use. Make four M3L10 Screw Pillars go through the Metal Back
Plate and the Mylar film from bottom towards top. And then place the Metal Back Plate on the table. Put
the four Washers (for AMD) around the Screw Pillars.
Step 2:
Step 2 : Back Plate Cap
Note: When installing on an AMD platform, please first insert the Back Plate Cap into the opening on the
Metal Back plate, make sure you have the Cap facing downwards.
Step 3:
Step 3 : Place the motherboard on top of the Back Plate. See the four Screw Pillars go through the four
holes around the processor socket. Cap the four Screw Pillars with the four Screw Nuts in a criss-cross
pattern.Make sure the side with a washer is facing the Back Plate.
11
4
2
1
3
AMD