Connection Diagrams; Install The Hardware - Axis P13-Serie Installationsanleitung

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 12 V, max 50 mA
A
I/O configured as input
B
I/O configured as output

Install the Hardware

NO TICE TICE
NO NO TICE
• Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required. Any
network cables that are routed outdoors or in demanding electrical environments shall be
shielded (STP) and intended for their specific use. Make sure that the midspan is properly
grounded. For information about regulatory requirements, see Regulatory Information 2.
Note
• Make sure that the material is strong enough to support the weight of the camera.
• For more technical specifications, see the camera's User Manual, available on
www.axis.com
AXIS P13 Series
17