Battery Installation - FMS 70mm A-10 Thunderbolt II V2 Benutzerhandbuch

E
N
Model assembly
4.Insert the foaming part by CA as shown.

Battery installation

1. Remove the canopy.
2. Remove the hook and loop tape from the fuselage. Apply the
looped surface to the battery.
3. Install the battery into the fuselage- securing it with the
preinstalled battery straps.
Note: The weight of each battery may vary due to different
manufacturing techniques. Move the battery fore or aft to
achieve the optimal center of gravity.
Required Adhesives:
Foam Safe Medium CA
8