swissflex _75RF bridge Bedienungsanleitung Seite 21

Health and comfort
Welcome to the world of Swissflex!
Your Swissflex _75RF / _75RF bridge® is a Swiss
quality product. If you follow the simple operating and
safety instructions, it will function to your complete
satisfaction for many years. In addition to its many
other advantages, your _75RF / _75RF bridge® of-
fers an undisturbed sleep environment. All electrical
connections between the mains plug and the bed
are virtually free of mains voltage (below 0.5 watts)
thanks to EcoTec.
Safety instructions
This device can be used by children
aged 8 and above and by people
with reduced physical, sensory or
mental capabilities or people lack-
ing experience and knowledge,
provided that they are supervised
or have been instructed in the safe
use of the device and understand
the dangers that may arise. Chil-
dren must not play with the device.
Cleaning and user maintenance
must not be carried out by children
without supervision.
CAUTION! The uni 14_/15_/22_/20
_75RF / _75RF bridge®RF / _75RF
/ _75RF bridge®RF bridge® and
accessories must be protected
from rain and other moisture to
prevent causing a fire hazard or
the risk of electric shock. In case
of spillages on an accessory, the
mains cable must be disconnected
from the power outlet and checked
by your Swissflex stockist.
When installing the slat base,
ensure that the head, back and
EN
foot sections are not obstructed
by furniture.
Ensure that the mains supply is
disconnected before any assem-
bly or disassembly work is car-
ried out on the slat base or the
bed frame.
Do not connect any devices to
the user socket (28) that could
endanger persons
age objects when the socket is
turned on by radio remote con-
trol, in particular electrical tools
such as saws, drills and similar
(risk of injury) or portable heat-
ing devices (risk of fire).
Never place the mains cable be-
tween the user socket (28) and
the bed in such a way that the ca-
ble insulation could be damaged
by sharp edges or twists. Never
feed the cable through the adjust-
ment mechanism.
In the case of damage to cables,
to the switching power supply
housing or to the user socket
(28), do not adjust the bed to
a seated position. Remove the
mains plug from the socket and
inform your stockist.
Never open the user socket
housing (28) to which the cables
or
Operating instructions
dam-
21