Razor E100 Gebrauchsanweisung Seite 7

REPAIR AND mAINTENANCE
q Chain and Rear Wheel Replacement
1
Loosen screws and remove
chain guard.
4
Remove wheel and install
replacement wheel
5
Push the chain tensioner
down to install the chain on
both sprockets.
2
Using two 13mm wrenches,
loosen the locknuts by turning
the wrenches counter clockwise.
6
With two 13mm wrenches,
re-tighten the locknuts.
3
To loosen the chain, push the
tensioner down to create some
slack in the chain.
7
Re-attach the chain guard.
6
Note: Rear wheel hardware
sequence
18-1
18-2
18-3
18-4
18-6
18-5
18-3
18-2
18-1 M8 Nut
18-2 Washer
18-3 Plate cut washer
18-5 Spacer
18-1