Nice BIG METRO Installierungs-Und Gebrauchsanleitungen Und Hinweise Seite 5

3.6 - Installation of BIG METRO Gearmotor
1 Remove the nuts and washers shown in the figure on the right (fig. 5).
2 Place the gearmotor inside the foundation box making sure it faces the cor-
rect direction.
3 Secure the gearmotor with the previously removed washers and nuts.
4 Connect the gearmotor to the gate by means of the connecting lever (2)
(fig. 4).
4
POSITION OF LIMIT SWITCHES
Closing limit switch (supplied with the
motor) mount as shown in the figure
5
Opening limit switch (supplied with the
motor) mount as shown in the figure
English – 3