PeakTech 1885 Bedienungsanleitung Seite 31

PROP <address> location {00-19} Voltage {000-XXX} Current {000-XXX}
Minute {00-99} Second {00-59} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
RUNM <address> location {1-9} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
RUNP <address> times {000-256} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
STOP <address> <CR>
Return Data from Power Supply:
[OK] [CR]
This manual is according the latest technical knowing. Technical changings, which are in the interest
of progress, reserved.
We herewith confirm that the units are calibrated by the factory according to the specifications as per
the technical specifications.
We recommend to calibrate the unit again, after 1 year.
®
© PeakTech 07/2019 / AW./EHR.
PeakTech Prüf- und Messtechnik GmbH – Gerstenstieg 4 –DE-22926 Ahrensburg / Germany
Command Code & Return Data
+49-(0) 4102-97398 80 +49-(0) 4102-97398 99

info@peaktech.de

www.peaktech.de
31
Description
Set Voltage, Current
and Time period of
Timed Program
Recall Preset Memory
1-9
Run Timed Program
(000 = run infinite
times)
Stop Timed Program