Pc-Connection; Connect Multiple Power Supplies To Pc Via Rs-485; Connection Diagram For Multiple Power Supply - PeakTech 1885 Bedienungsanleitung

Action
4.
Use
or
thru
5.
Press
6.
Note : whenever to terminate the Preset Program, press "CLEAR" to return to the normal operation.
7. PC connection
The new SDP series can be connect use USB or RS-485. It is auto select between USB and RS-
485.
*Please do not connect both USB and RS-485 at the same.

Connect Multiple Power Supplies to PC via RS-485

For multiple power supplies, use the RS-485 Interface through the RS-485 port at rear panel of the
power supply. Up to 31 power supplies can be connected via RS-485.
You will need a USB to RS-485 Adapter and the connection shown in Figure 6a & 6b.
Figure 7a.

Connection diagram for multiple power supply

Connect to
PC's USB
port
Figure 7b. Connection diagram between USB Adapter and RS-485 Connectors.
LCD Display
USB to RS-485 Adapter
(Optional Accessory)
USB to RS-485 Adapter
(Optional Accessory)
Use JOG or numbering keypad select number
of cycle to be run.
Press this key to start running
Press this key terminate the program running
anytime.
27
Description
USB
connection