Setting Of Timed Program; Run Timed Programming - PeakTech 1885 Bedienungsanleitung

6.3.2 Setting of Timed Program

Action
1.
Press
Then
2.
Use
or
thru
3.
Press and
4.
Use
or
thru
5.
Press
Note : whenever to terminate the Timed Program, press "CLEAR" to return to the normal operation.

6.3.3 Run Timed Programming

Action
1.
Press
Then
2.
Use
or
thru
3.
Press
LCD Display
Press
program step setting.
Use JOG or numbering Keypad to select step
to be review.
Use UP/DOWN key to move around voltage,
current and time setting of step.
The select part will flash to indicate it is under
modification.
Use JOG or numbering keypad to modify the
voltage, current and time.
Press this key to confirm
LCD Display
Press
rVMP
02
Use JOG or numbering keypad select number
of steps to be run start from step 0.
The minimum steps to be run is 2.
Press this key next to set number of cycle to
be run.
26
Description
and to enter into timed
Description
and to enter in run menu.