PeakTech 1885 Bedienungsanleitung Seite 15

Timer minute [####] second [##] timer [ON] colon [ON] m [ON] s [ON]
Setting voltage [###] V-const [ON] V-bar [ON] V [ON]
Setting current [###] I-Const [ON] I-bar [ON] A [ON]
Program [#] Program [ON] P-bar [ON]
SETTING [ON] Key lock [ON] Key open [ON] FAULT [ON] Output on [ON]
Output off [ON] Remote [ON] [CR]
[OK] [CR]
Input Command:
VOLT <address> voltage {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
CURR <address> current {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
SOVP <address> voltage {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
SOUT <address> 1 <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
SOUT <address> 0 <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
POWW <address> location {1-9}0 <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
POWW <address> location {1-9}1 <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
PROM <address> location {1-9} Voltage {000-XXX} Current {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Input Command:
PROP <address> location {00-19} Voltage {000-XXX} Current {000-XXX}
Command Code & Return Data
15
Description
Set Voltage Level
XXX-Max. Output
Rating
Voltage = XX.X V
Current = X.XX V
Set Current Level
Set Upper Voltage Limit
of PS
Disable Output of PS
Enable Output of PS
Enable the output
when switch on the
power supply.
Disable the output
when switch on the
power supply.
Set Voltage and
Current values of
Preset Memory
Set Voltage, Current