Output Enable/Disable At Power Up; Adjust Lcd Brightness - PeakTech 1885 Bedienungsanleitung

6.1.5 Output Enable/Disable at Power Up

Action
1. Press
Then
2. Press
Then

6.1.6 Adjust LCD brightness

Action
1. Press
Then
2.
Rotate
3.
Press
LCD Display
This will enable the output at power up.
i.e. When you switch on the power supply, the
output is also ON automatically with last set
voltage value.
This will disable the output at power up.
i.e. The output will be OFF at next power up.
This is the default setting for safety reason !!
LCD Display
Press
Bl
set menu.
6
Use JOG adjust LCD brightness. It has 10
level of brightness. 0 means LCD brightness
off. 9 means the most brightest.
Press this key to confirm
23
Description
Description
and to enter into brightness