Bionaire BSF002X Bedienungsanleitung Seite 5

U.K. AND IRELAND
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS.
This appliance can be used by
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Unplug from the electrical outlet when
not in use, when moving the fan from
one location to another, before putting
on or taking off any parts and before
cleaning.
Ensure that the fan is switched off from
the supply mains before removing the
guard.
If the supply cord or plug is damaged, it
must be replaced by the manufacturer or
its service agent or a similarly qualified
person in order to avoid hazard.
• To protect against electrical shock, do not
immerse the fan, plug or cord in water or spray
with liquids.
• Avoid contact with any moving parts.
• Do not operate in the presence of explosive and/
or flammable fumes.
• Do not operate fan until fully assembled with all
parts properly in place.
• To avoid fire hazard, NEVER place the cord
under rugs or any parts near an open flame,
cooking or other heating appliance.
• Do not use outdoors.
• Do not let the cord hang over the edge of a
table or counter, or come into contact with hot
surfaces.
• To disconnect from the electrical supply, grip the
plug and pull from the wall outlet. DO NOT pull
on the cord.
• Always use on a dry, level surface.
• Do not operate your fan unless the fan grilles are
properly fitted.
• This product is intended for household use ONLY
and not for commercial or industrial applications.
• Should the fan stop working, first check the fuse
in the plug (UK only) or fuse/circuit breaker at the
distribution board is operating, before contacting
the manufacturer or service agent.
INSTALLATION OF A PLUG (UK / IRELAND ONLY)
If the plug is not suitable for the socket outlets in your
home, it can be removed and replaced by a plug of
the correct type.
If the fuse in a moulded plug needs to be changed,
the fuse cover must be refitted. The appliance must
not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and
removed from the supply cord and an appropriate
plug fitted as detailed. If you remove the plug it must
not be connected to a 13 amp socket and the plug
must be disposed of immediately.
If the terminals in the plug are not marked or if you
are unsure about the installation of the plug please
contact a qualified electrician.
This symbol indicates that this unit is a
Class II appliance and therefore an earth
connection is not required.
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Do Not Connect
Mains Wires Here
Blue
(Neutral)
Ensure that the outer sheath of
the cable is firmly held by the cord grip
5
5A
Fuse
Brown
(Live)