Replacing The Lamp; Installation; Technical Data; Environmental Concerns - AEG S74010KDWF Benutzerhandbuch

22 www.aeg.com
If the advice does not lead
to the desired result, contact
the nearest Authorised
Service Centre.

6.2 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.

7. INSTALLATION

WARNING!
Refer to Safety chapters.
7.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
7.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the

8. TECHNICAL DATA

Height
Width
Depth
Voltage

9. ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol
Put the packaging in applicable
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
1850 mm
595 mm
668 mm
230 - 240 V
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
7.3 Installation of the
appliance and door reversal
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
Frequency
The technical information is situated in
the rating plate, on the external or
internal side of the appliance and in the
energy label.
containers to recycle it. Help protect the
.
environment and human health and to
50 Hz