General Operation; Maintenance - Beyerdynamic UNITE TH Kurzanleitung

Unite TH – Handheld Transmitter
4.

General operation

• Important: Before using the handheld transmitter for
the first time, you must charge the built-in battery.
Please use an appropriate Unite charger or the USB
connection.
• Switch on the transmitter by pressing the on-off
button .
• In order to establish an audio connection between a
transmitter and one or more receivers, all devices
must be paired together. See chapter 5.
• All devices are supplied with the group ID 256 and
fixed audio encryption allowing quick and easy initial
use.
• The transmitter will only transmit the audio signal on a
channel with a predefined channel name. If there are
several transmitters in a group, the channel for the
respective transmitter can be selected on the receiver.
• If you require several device groups or an audio trans-
mission even more secure against eavesdropping, to
avoid listening by other groups using Unite devices,
follow the steps in chapter 5 to create a new pairing.
4.1

Maintenance

• Protect the handheld transmitter from humidity, knocks and
shock. Avoid dropping the transmitter at all times.
• For cleaning the plastic surface of the handheld transmitter
use a soft cloth moistened with a solvent-free plastic
cleaner.
• As soon as your microphone
sounds dull, you should clean
the integrated pop shield:
– Unscrew the microphone
grille anti-clockwise.
– Pull out the foam pop
shield, if necessary use
tweezers.
Unscrew microphone grille
Pull out the pop shield
11