EWT MaxiHC B Montage- Und Bedienungsanleitung Seite 9

Runback Timer
The heater is fitted with a Runback Timer feature which can be set in either cooling or
heating modes. The Runback Timer range is 1 to 12 hours. To set Runback Timer please follow
the directions below:
Has Runback Timer been set previously?
NO
Press to set Runback Timer.
• After pressing
flash for 6 seconds. After 6 seconds the
Runback Timer period will be set.
Icon will
Runback Timer is active.
Has Runback Timer been set previously?
YES
Current Runback Timer:
Runback button can
remaining time
Runback Timer can be edited or if left alone
for 6 seconds will continue in its runback and
return to the main screen.
Cancelling Runback Timer:
To cancel the runback timer the user can
go back into runback settings and change
the runback time to 0 or press the Standby
button.
Runback Timer, icon
be on solid while
be pressed to
of Runback Timer.
Decrease
time (stops at 0hr)
Cancel Runback
will
RUNBACK TIMER SET
Decrease Runback time to 0 to
cancel Runback Timer
view
The
Cancel
Timer
Runback Increase
time (stops at 12hr)
Increase Runback tim e
Icons will be flashing while setting
Runback Timer
Runback Press Runback Timer
button to cycle to 0
to
Timer
Runback
Increase Runback
time
Cancel Runback