Herunterladen Inhalt Inhalt Diese Seite drucken

EWT MaxiHC B Montage- Und Bedienungsanleitung Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Standby
When the appliance is plugged in there will be an audible beep.
First time setup?
YES
On first time start-up the product will start
with the default settings. The temperature will
be set to 22ºC and the heat setting will be set
to intelligent heat mode, see Heat Selection
on the screen below
When put into standby mode there is a countdown from 10 to 1 before shutting down.
.
When
disconnected
reconnected and turned back on product will return to last used settings for Heat Selection, Fan
Selection, Temperature Setting, Sound and Audio. Bluetooth will attempt to re-pair. Runback
Timer and Oscillation will return to OFF.
Standby mode
Power going to the product but the product
is not turned ON. Once the standby button
has been pressed the product will turn ON
and STANDBY icon will turn OFF.
Press the Standby button to turn the product On.
Press the Standby button to put the product into Standby.
from
the
power
Note:
Inactive buttons
will not beep when pressed.
NO
When subsequently turned on the product
will return to the last used settings for Heat
Selection, Fan Selection, Temperature Setting,
Sound and Audio. Bluetooth will attempt to
re-pair,
see
Oscillation will return to OFF. The screen below
shows an example where the user
set temperature to 25ºC and Heat Selection
to LOW.
supply
(plugged
Bluetooth.
Runback
out/power
cut/tilt
Timer
and
previously
switch)
then

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Maxihc w

Inhaltsverzeichnis