Product Description; Safety Warnings; Charging The Battery; User Manual - PNI PMR R30 Pro Benutzerhandbuch

EN
MAINE FEATURES:
• PMR 446MHz
• Output power: 0.5W
• 16 channels (8 PMR channels + 8 pre-programmed)
• Communication range up to 10 km

PRODUCT DESCRIPTION

A - LED indicator. The LED turns red in emission and green in the reception.
B - Channel switch. Rotate this knob to change the channel.
Channel no. 16 is the scanning channel (channels 1 - 15). The radio will stay on a channel while receiving
a signal. If for 15 sec. no longer detects any signal, the radio will continue to scan the next channel. To
disable the scan function, simultaneously press the PTT and MONI keys while on channel 16. Do the same to
reactivate the function.
C - Turn on / off radio and volume control. Turn this knob clockwise to turn on the station. Rotate completely
anti-clockwise to turn off the radio. When the radio is on, turn both ways to adjust the volume.
D - PTT (Push to talk). Press this button to emit, release the button to receive.
E - Monitor. The Monitor function allows you to deactivate the squelch temporarily in order to receive extremely
weak signals. Press and hold this button to hear the background noise. Release the button to return to normal
operation mode.
F - Flashlight. Press to turn the flashlight on.
G - Speaker and microphone 2 pin connector
H - Speaker
J - Microphone

SAFETY WARNINGS

• Do not disassemble the radio casing. Do not repair the station by yourself, call a specialist center.
• The device generates interference that may affect the operation of TVs or radios.
• In case of interference, remove the PMR station from the affected device.
• In order not to damage the radio station, do not use the station without an appropriate antenna
• To avoid damaging the radio, do not emit too long
• Close the radio if you are in a flammable or explosive environment

CHARGING THE BATTERY:

Follow the LED on the charger to find out the battery charge level:
2

User manual