WaveInjector WI Cryo
3.7
Mounting the transducer and the transducer box
For the mounting of the transducer and the transducer box see supplement to user manual SUFLUXUS_WI.
When mounting, make sure the coupling foil was positioned beneath the coupling plate and the transducer.
3.8
Mounting of the Cryo insulation box (part B)
• Fix part B of the insulation box to part A by tightening the 4 screws (see Fig. 3.9).
• Press the transducer cable into the smaller groove on the sidewall of part B (see Fig. 3.10).
Cryo insulation box (part B)
36
Fig. 3.8: Mounting of the transducer and the transducer box
Fig. 3.9: Mounting of the Cryo insulation box (part B)
transducer cable
Fig. 3.10: Mounted part A and B of the Cryo insulation box
transducer and transducer box
holes for the 4
screws
Supplement to User Manual - ENGLISH
SUFLUXUS_WI_CYOV1-2, 2016-12-16