Mounting Of The Wit-R Bench; Disassembly Of The Wit-R Jaw And The Wit-R Opposite Jaw; Mounting Of The Insulation Pad - Flexim WaveInjector WI Cryo Ergänzung Zur Bedienungsanleitung

WaveInjector WI Cryo
3.2

Mounting of the WIT-R bench

For the mounting of the WIT-R bench see supplement to user manual SUFLUXUS_WIT-R_Tool.
• Smooth the pipe surface.
For the smoothing of the pipe surface see supplement to user manual SUFLUXUS_WI or SUFLUXUS_WIT-R_Tool.
3.3

Disassembly of the WIT-R jaw and the WIT-R opposite jaw

• Remove the chain of the WIT-R jaw and the WIT-R opposite jaw by loosening the nuts (see Fig. 3.2).
• Remove the WIT-R jaw and the WIT-R opposite jaw by loosening the screws.
3.4

Mounting of the insulation pad

• Insert the 2 plastic screws into the holes of the jaw.
• Press the insulation pad onto the plastic screws (see Fig. 3.4 and Fig. 3.5).
34
WIT-R opposite jaw
screws
nuts
Fig. 3.2: WIT-R work bench with jaw and chain support
Fig. 3.3: Disassembly of the WIT-R jaw and the WIT-R opposite jaw
insulation pad
Fig. 3.4: Mounting of the insulation pad
chain support
jaw
WIT-R jaw
plastic screws
Supplement to User Manual - ENGLISH
SUFLUXUS_WI_CYOV1-2, 2016-12-16