AtriCure CRYO1 Installationsanweisungen Seite 8

2. Cleaning:
NOTE: Do not spray or pour liquids directly on the unit.
NOTE: The unit and/or accessories cannot be sterilized.
WARNING: Ensure Isopropyl Alcohol (IPA) is completely dry
before operating the unit.
CAUTION: Avoid caustic or abrasive cleaners
Guidelines
The following guidelines are recommended for cleaning the unit.
It is the user's responsibility to qualify any deviations from these
processing methods.
1. Disconnect the unit or cart from the outlet before cleaning.
2. If the unit and/or accessories are contaminated with blood
or other body fluids, they shall be cleaned before the
contamination can dry (within two hours of contamination).
3. The outer surfaces of the unit and/or accessories shall be
cleaned with 70% -90% Isopropyl alcohol (IPA) wipes for a
minimum of two minutes. Do not allow fluids to enter the
chassis.
4. Pay attention to all areas where fluids or soil may gather,
such as under/ around the handles or any tight crevices/
grooves.
5. Dry the unit and/or accessories with a dry, white lint-free
cloth.
6. Conduct a final confirmation of the cleaning process by
visually inspecting the white cloth for remaining soil.
7. If soil remains on the white cloth, repeat steps 3 through 6.
8. After cleaning is complete, turn the unit on to perform
Power On Self-Test (POST). If any errors are received,
contact AtriCure to begin return process.
8 of 70