Grill & Fan Blade Assembly - Beko EFT4100W Bedienungsanleitung

3 Grill & fan blade assembly
1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counter
clockwise to remove both of them. Fix the rear guard to the motor then tighten the plastic nut
again. (Fig. 1)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove of the blade. Turn
the spinner counter clockwise to tighten the blade. (Fig. 2)
3. Fasten the front guard and the rear guard by the guard clip and then tighten the fan guard locking
screw and nut. (Fig. 3)
Plastic nut
Fig. 1
Table fan / User Manual
Spinner Spinner
Tight
Loose
Fig. 2
Tight
Slot
Retaining
Blade
pin
Fig. 3
7 / 12 EN