Grill & Fan Blade Assembly - Beko EFS5100W Bedienungsanleitung

4 Grill & fan blade assembly
1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut
counterclockwise to remove both of them. Fix the rear grill to the motor then tighten the plastic nut
again. (Fig. 5)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove of the blade. Turn
the spinner counterclockwise to tighten the blade. (Fig. 6)
3. Fasten the front grill and the rear grill by the grill clip and then tighten the fan grill locking screw and
nut. (Fig. 7)
Plastic nut
Fig. 5
8 / 12 EN
Spinner
Spinner
Tight
Loose
Fig. 6
Tight
Slot
Retaining
pin
Blade
Fig. 7
Stand fan / User Manual