Care And Maintenance; Declaration Of Conformity; Technical Data - Aventics CAT Betriebsanleitung

AVENTICS | CAT | R412026160–BAL–001–AD | English
1
Display of the operating state
The operating state of the CAT measuring instrument is displayed by means of five LEDs.
W If no LED is illuminated, the CAT measuring instrument is not switched on or the battery
charge level is at 0%.
W The state of the CAT measuring instrument is displayed by means of lit LEDs (see table
below).
LED Function
Green Cushioning optimally set
Yellow Cushioning can be set
Red Cushioning must be set
Yellow Cushioning status on the setting screw, throttle
movement to the left
Yellow Cushioning status on the setting screw, throttle
movement to the right
Green Battery charge level = battery full, no charging required
Red, flashing Battery charge level = battery must be charged
LED is off No Bluetooth connection
Blue Bluetooth connection active
Optional: Create a Bluetooth connection between the CAT
measuring instrument and mobile end device
The CAT measuring instrument uses Bluetooth radio technology for wireless connection of the
CAT measuring instrument with an app on your smartphone or tablet. The radio technology does
not cause interferences with the measuring functions of the CAT measuring instrument. The app
displays the measurements on your smartphone or tablet monitor and allows the display at a
certain distance from the CAT measuring instrument within the reach of the Bluetooth signal.
Requirements
W Android version at least 4.4
W Bluetooth interface at least 4.0
W The Bluetooth function must be activated on your mobile end device (e.g. smartphone) with
which you want to establish a connection.
W The end device (e.g. smartphone) must be set to visible for all other Bluetooth devices.
W The GPS (Global Positioning System) must be activated in an Android device.
W The CAT measuring instrument must be switched on.
Downloading and installing the CAT app
The following information can be presented and read out with the help of the CAT at AVENTICS
app:
W Piston speed before reaching the cushioning
W Battery charge level
W Bluetooth connection status
W Path-time diagram in the cushioning area
W LED display for the setting process (for the cushioning state see the display of the operating
state)
1. Search for the CAT by AVENTICS app at the "Play Store" or "Apple Store".
Availability of this app may rely on the region or service provider.
2. Download the CAT by AVENTICS app free of charge.
3. Install the app on your mobile end device (e.g. smartphone)
Connect the CAT measuring instrument to the app on your mobile end device
1. Fulfill the requirements under "Optional: Create a Bluetooth connection between the CAT
measuring instrument and mobile end device".
2. Open the installed CAT by AVENTICS app.
3. Actuating the CONNECT button creates a connection to the "AVENTICS device"
(CAT measuring instrument).
No other CAT measuring instrument may be in operation within a diameter of
approx. 10 m.
No PIN required.
If a coupling prompt is shown, select cancel.
4. The setting process can now be carried out as described under "Commissioning the CAT
measuring instrument".
5. Close the app when it is not in use to save energy.
Other app button functions:
"Bluetooth" button: reset the Bluetooth connection
"Connect" button: reconnect to the "AVENTICS Device" (CAT measuring instrument).
6

Care and Maintenance

Damage to the surface caused by solvents and aggressive detergents
The surfaces and seals could be damaged by solvents or aggressive cleaning agents.
O
Never use aggressive solvents or detergents.
The CAT measuring instrument is maintenance-free.
O
Regularly inspect the CAT measuring instrument for potential damage.
7 Disposal
Dispose of the measuring instrument according to the regulations in your country of send the
measuring instrument to AVENTICS GmbH, Ulmer Straße 4, 30880 Laatzen in Germany for
disposal.
8

Declaration of conformity

Search for the current declaration of conformity of the product using the search mask in the
AVENTICS Media Centre at:
www.aventics.com/en/media-centre
Search term : CAT KOE
9

Technical Data

General data
Measuring ranges
Ambient temperature
Charging temperature
Protection class
Charging speed with the 5 V USB charger
Capture speed
Operating voltage
Quiescent current (without load)
Max. service life with constant operation
Bluetooth ISM band 2.4 ... 2.48 GHz
TX-Power
Elastic mounting strap for cylinder diameter
Automatic switch off after
Housing material
Weight
Standards and directives complied with
2014/53/EC
See also the current declaration of conformity of the product at:
www.aventics.com/de/media-centre
Search term: CAT KOE
NOTICE
64 mm
–5 ... +40 °C (23 ... +104 °F)
0 ... +45 °C (32 ... +113 °F)
IP50
450 mA / 2.5 h
0.2 m/s ... 2 m/s
3.7 V DC
150 mA
4 h
7.5 dBm
16 ... 125 mm and 125 ... 320 mm
5 min
Luran S
120 g
Radio installations directive
5