About This Documentation; Documentation Validity; Required And Supplementary Documentation; Presentation Of Information - Aventics ES05 Bedienungsanleitung

1

About this Documentation

1.1

Documentation validity

This documentation contains important information on the safe and appropriate operation of the
product.
O Read this documentation completely, especially the chapter "Notes on Safety" before working
with the product.
1.2

Required and supplementary documentation

O Also observe the instructions for the ES05 valve system (R422003601).
1.3

Presentation of information

To allow you to begin working with the product quickly and safely, uniform safety instructions,
symbols, terms, and abbreviations are used in this documentation. For better understanding, these
are explained in the following sections.
1.3.1

Safety instructions

In this documentation, there are safety instructions before the steps whenever there is a risk of
personal injury or damage to equipment. The measures described to avoid these hazards must be
followed.
Safety instructions are set out as follows:
Hazard type and source
Consequences
O Precautions
W Safety sign (warning triangle): draws attention to the risk
W Signal word: identifies the degree of hazard
W Hazard type and source: identifies the hazard type and source
W Consequences: describes what occurs when the safety instructions are not complied with
W Precautions: states how the hazard can be avoided
Table 1: Hazard classes according to ANSI Z 535.6-2006
Safety sign, signal word
CAUTION
1.3.2 Symbols
The following symbols indicate information that is not relevant for safety but that helps in
comprehending the documentation.
AVENTICS | ES05 | R415017129–BAL–001–AA
SIGNAL WORD
Meaning
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
21
About this Documentation