Victron energy BPP2 Anleitung Seite 18

4.3.1 The system overview
The system overview is designed to work with the VE.Net to VE.Bus The system overview is designed to work with the VE.Net to VE.Bus
converter (VVC) connected to a Phoenix Multi or Quattro, and optionally converter (VVC) connected to a Phoenix Multi or Quattro, and
a VE.Net Battery Controller (VBC) and VE.Net Generator Module (VGM). a VE.Net Battery Controller (VBC) and VE.Net Generator Module (VGM).
A
B
C
The different information that can be displayed on the system overview is The different information that can be displayed on the system overview is
described below. The actual information that will be displayed depends described below. The actual information that will be displayed depends
on which devices are configured, as well as the current system state.
Item
A The AC input to the Multi or Quattro.
B The AC output of the generator.
C The battery voltage and time to go.
D The AC output of the Multi or Quattro.
The DC current transferred between the battery and the Multi
E
or Quattro.
F The current used by the DC system.
Indicates the state of the Phoenix Multi or Quattro (see chapter Indicates the state of the Phoenix Multi or Quattro (see chapter
5.2 more information).
When this icon contains an upwards pointing arrow, it means When this icon contains an upwards pointing arrow, it means
that the battery is charging. When discharging, the icon will that the battery is charging. When discharging, the icon will
indicate the state of charge.
12
d, as well as the current system state.
Description
battery and the Multi
D
E
F