Victron energy BPP2 Anleitung Seite 14

Inhaltsverzeichnis

Verfügbare Sprachen

be used to change the value. When editing text, the left and right

directional buttons can be used to move the cursor in order to edit

different characters.

3.6 The overview screen

The overview screen displays the most important values from different

devices on the network together in one screen. To display the overview,

press the centre button while the device list is displayed. The

ress the centre button while the device list is displayed. The BPP can

also be configured to display the overview screen automatically after a

period of inactivity (see chapter 4.2 for more information). The

appearance of the overview screen depends on which type of overview

has been configured. See chapter 4.3 for more information.

3.7 Alarms

When a VE.Net device experiences a problem, it will generate an alarm.

The BPP will display a message with information about the alarm.

will display a message with information about the alarm.

Additionally, the BPP can be configured to generate an audible alarm,

and/or close its relay contact.

To acknowledge the alarm, press the right soft-

button. This will hide the pop-up, and disable the

buzzer. However, this does not switch off the

relay. The relay will remain closed until the device

that generated the alarm indicates that the alarm

condition is no longer present.

To stop editing, press the right soft-button to save

the changes, or the left soft-button to restore the

old value.

for more information). The

can be configured to generate an audible alarm,

As long as there are persisting alarm conditions, a

warning will be displayed at the top of the screen.

To view the details of the alarms, press the centre

To view the details of the alarms, press the

button. It is not possible to display the overview

screen whilst there are persisting alarm conditions.

button to restore the

for more information.

button to save

Inhaltsverzeichnis