Bicycle Helmet Sp; Safety Information - Crivit SP-61 Gebrauchsanleitung

Bicycle helmet SP-61

Bicycle helmet SP-61

Safety information

User information
1. The correct helmet position
2. Adjusting the single-hand twisting fastener
3. Adjusting the strap divider
4. Adjusting the chin strap
5. Visor
6. Cleaning and care
7. Disposal
LED - Rear light SP-2
Safety information
User information
1. Before the first use
2. Removal and attachment of the tail light
3. Functions
4. Changing the batteries
5. Cleaning and care
6. Disposal
Dear Customer!
We are pleased that you have decided to purchase one of our high-quality products, which
are manufactured and certified in strict adherence to the currently valid safety standards.
BICYCLE HELMET SP-61
4
Safety information
04
• Warning: Do not allow children to wear this helmet while climbing or playing as this
carries a risk of strangulation.
05
• Your helmet was specially designed for protection during cycling
05
skateboarding
other types of sport or for motorcycling
05
• Please note that the helmet can only provide protection if it fits correctly. Please ensu-
05
re you try out a range of different sizes before buying.
06 • Please be aware that despite correct adjustment your helmet cannot always protect
you from all injuries.
06
• The helmet should be checked for visible deficiencies at regular intervals.
06
• Following each hard impact, blow or deep scratch, the helmet must be replaced since
its protectiv effect is lost. The helmet should be replaced if it does not fit correctly any-
06
more or 3 years after its date of manufacture at the latest even if there is no visible
damage.
06
• Any adjustment to or removal of the original parts of the helmet can extremely impair
its protective function. The helmet may not be altered in order to make additions in a
07
way not recommended by the manufacturer.
07
• Clean the inner padding with lukewarm water and mild soap and then let it air dry
07
• High temperatures, from as low as 60° C, can seriously damage the helmet. Uneven
helmet surfaces and the formation of small blisters are signs of such damage. Do not
07
store behind panes of glass, e.g. in the car or close to sources of heat or warmth.
08
User information
08
1. The correct helmet position
08
• The helmet must always be levelly horizontal on your head.(Fig. A)
08
• If the helmet is too far forward, it can impair your vision.
08
• If the helmet is too far back, your forehead is not sufficiently protected. (Fig. B)
2. Adjusting the single-hand twisting fastener
The integrated size-adjusting system can be adjusted using a turning knob at the back of
one's head (Fig. C):
• smaller = twist clockwise
• bigger = twist anti-clockwise
3 2
, roller-skating and riding a scooter
5
.
5
Bicycle helmet SP-61
1
,
4
. It must not be used for