Technical Data; Ec Declaration Of Conformity; English (Original) - DeWalt DE9116 Bedienungsanleitung

CHARGER
DE9116/DE9117/DE9130/DE9216
Congratulations!
You have chosen a D WALT product. Years of experience, thorough product development and innovation
E
make D WALT one of the most reliable partners for professional users.
E

Technical data

Mains voltage V
AC
(U.K. & Ireland only) V
Output V
DC
Charge current
normal mode A
equalise mode mA
maintenance mode mA
Charging time
2.4 Ah NiCd packs min
2.0 Ah NiCd packs min
1.3 Ah NiCd packs min
3.0 Ah NiMH packs min
2.6 Ah NiMH packs min
Weight kg
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
DE9116 DE9117
230 230
230 230
7.2–18 7.2–18
2.8 8.3
150 150
63 63
70 30
60 15
30 15
90 50
75 35
0.4 0.9
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
EC-Declaration of Conformity
DE9116/DE9117/DE9130/DE9216
D WALT declares that these products described
E
under "technical data" have been designed in
compliance with: 89/336/EEC, 2006/95/EC,
EN 60335, 2002/95/EC, EN 55014-1, EN 50014-2,
EN 61000-3-2, EN 61000-3-3.
This unit must not be put into service until it was
established that the power tool to be connected to
this unit is in compliance with 98/37/EC (identified by
the CE-marking on the power tool).
For more information, please contact D
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
DE9130 DE9216
230 230
230 230/115
7.2–18 7.2–18
5.0 2.8
150 150
63 63
35 70
30 60
15 30
– 90
40 75
0.5 0.4
Denotes risk of electric shock.
Denotes risk of fire.
WALT at the
E
EN GL IS H
17