Installation Of The Appliance; Room Ventilation - System4 1G1PI1G Bedien- Und Installationshandbuch

INSTALLATION OF THE APPLIANCE

All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly.
Appliances must be at some distance from the
wall (at least 5 cm if the wall is not designed to
be resistant to a temperature of at least
150°C)
Install in accordance with the relevant legislation,
regulations and specifications in the country of use.
Important
Provide a drain in the floor for the well to
empty into.
IT
GB

ROOM VENTILATION

DE
The room where the appliance is installed must
have air inlets to ensure that the appliance can op-
FR
erate correctly and provide the necessary air ex-
change in the room itself.
ES
The air inlets must be of appropriate size and must
be protected by gratings and placed so that they
cannot be obstructed.
English
Caution - warning
The temperature underneath the appliance
may exceed 65 K. If the floor is made of an in-
flammable material or one which will not with-
stand this temperature, an insulating material
at least 10 mm thick (e.g. ceramic tiles), or a
reflecting material (e.g. steel) must be laid be-
tween the appliance and the floor (for version
1G1PI1G only)
- 16 -
IDM-39603304300.tif
IDM-39618400800.tif