System4 1G1PI1G Bedien- Und Installationshandbuch Seite 35

SWITCHING THE BURNER ON AND OFF
Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) while at the same time pressing the pi-
ezoelectric ignition knob (B) repeatedly to light
the pilot light.
Keep the knob pressed for about 15 sec. to prime
the thermocouple.
3 - Turn the knob (A) anti-clockwise (pos. 2) to light
the burner.
4 - Turn the knob (A) gradually anti-clockwise to
adjust the power of the flame down to the mini-
mum setting.
Turning off
1 - Turn the knob (A) clockwise (pos. 3) to turn the
burner off.
The pilot light will remain on to allow the burner
to be re-lit.
2 - Turn the knob (A) clockwise (pos. 4) to turn off
the pilot light.
3 - Turn off the knob to ensure safety.
FILLING THE PAN
To carry out this operation, proceed as follows.
1 - Raise the lid (A).
2 - Turn the water spout (B) towards the pan.
3 - Turn on the water taps (C) to fill the pan to a lev-
el between the two marks (D).
For faster boiling times, use hot water only; use
cold water only when specifically required.
4 - Turn the water spout outward and then close
the lid (A).
Caution - warning
Never use the appliance with no water in the
well, as this may damage its structure.
A
B
D
C
- 9 -
1
2
3
4
IDM-39618400300.tif
A
IDM-39618400400.tif
A
B
IT
GB
DE
FR
ES
English