Quick Reference; Installation - Datalogic Magellan 1100i Schnellanleitung

Quick Reference

This guide is provided to help get your installation up-and-run-
ning quickly and efficiently. For more details, including program-
ming information, reference the Product Reference Guide (PRG),
which is available for viewing and download from the Datalogic
website listed on the back cover of this manual.

Installation

Route the interface cable from the terminal or host. Plug the AC
adapter (if one is used) into a wall outlet and the interface (I/F)
cable, then route and attach the I/F cable to the scanner. Verify
operation by presenting known-good bar codes to the scanner.
The unit should beep
the bar code data to the host or terminal. If not, refer to the Trou-
bleshooting section of this guide.
Scanner installation is complete.
Connect
Here
The Magellan 1100i utilizes illumix™ intelligent illumination tech-
nology to optimize light levels for a variety of bar code scanner
functions including automatic reading of bar codes from printed
surfaces, mobile devices and image capture in variable contrast
environments.
1. Beeper and LED behavior is selectable and may have been disabled by a
previous user.
Quick Reference Guide
1
and/or flash its good read LED and send
I/F Cable
To Host/Terminal
For 220-230 VAC
adapters, the
cord must be
facing down as
shown in the
illustration. If
installed upwards,
A/C Adapter it will pose an
(if needed) undue strain on the
socket outlet.
1