Wiring - AKO -52044 Bedienungsanleitung

6.- Wiring

Always disconnect the power supply to do the wiring.
The power circuit should be equipped with a switch for its disconnection of at least 2 A, 230 V, situated near
the appliance.The power supply cable will be H05VV-F or H05V-K. The section tobe used will depend on
current local regulations, but should never be less than 1 mm .
Cables for wiring the relay contact should have an adequate section depending on the unit to be connected.
Make sure you have connected the batteries before starting-up the unit.
Digital
inputs
2
Relay 1
18
5204H401 Ed.01
Relay 2
5 A 5 A