Instructions For The User; Control Panel - Walo Professional S-BP40 Installations-, Gebrauchs- Und Wartungsanleitung

Our equipment was designed to guarantee high performance levels and quality with regard to washing,
filtering, noise and energy savings. This equipment must only be used for the purpose for which it was
expressly designed, which is washing dishes with water and specific detergents. Any other use shall be
considered improper.
This appliance will not carry out the rinsing cycle if water is not supplied from the water network, blocking all
functions with the error message:
Run a couple of empty cycles to clean the basin and all conductors of the production oils.
Do not wash decorated dishes
Prevent silverware from coming into contact with other metals
Avoid residue from drying on the dishes
Remove more consistent solid residue from the dishes to prevent clogging the filters
Pre-treat the dishes by rinsing them with cold or warm water, without using any detergent
Use the automatic dispensers for the detergent
If the automatic dispenser is not provided, pour non-foaming detergent in the basin when the water
has reached the washing temperature.
A = washing cycle I indicator light
B = washing cycle II indicator light
C = washing cycle III indicator light
D = "red indicates alarm" "green indicates normal
operation" indicator light
E = draining cycle indicator light
F = regenerate or confirm data in case of
changing parameters indicator light
G = on/off indicator light
H = washing cycle I
I = washing cycle II
L = washing cycle III
M = draining cycle
Cod.W010212

3. INSTRUCTIONS FOR THE USER

Allarm 01 ( see par.2.3 "warning messages").
WARNINGS

CONTROL PANEL

LEGEND
Pag.35
N = regenerate or confirm data in case of changing
parameters indicator light
O = on/off
P = basin temperature display
Q = boiler temperature display
09/05/2017