Advanced Bionics CPI-3 Gebrauchsanweisung Seite 16

Radiated
3 V/m
RF IEC
80 MHz
61000-
to 2.5
4-3
GHz 3
Note 1: These guidelines
may not apply in all
situations. Electromag-
netic propagation is
affected by absorption
and reflection from
structures, objects, and
people.
a. Equipment can be
sensitive to ES. Handle
with care.
b. Field strengths from
fixed transmitters, such
as base stations for
radio (cellular/cordless)
telephones and land
mobile radios, amateur
radio, AM and FM radio
broadcast, and TV
broadcast cannot be
predicted theoretically
with accuracy. To assess
the electromagnetic
environment due to fixed
RF transmitters, an
3 V/m
Portable and mobile RF
communications equipment
should be used no closer to
any part of the CPI-3 system,
including cables, than the
recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance
d = 1.2√P < 800 MHz
d = 2.3√P ≥ 800 MHz
where P is the maximum
output power rating of the
transmitter in watts (W)
according to the transmitter
manufacturer and d is the
recommended separation
distance in metres (m). Field
strengths from fixed RF
transmitters, as determined
by an electromagnetic site
survey,
the compliance level in each
frequency range.
may occur in the vicinity of
equipment marked with the
following symbol:
should be less than
b
Interference
c
15