OERTLI RS 100 R Bedienungsanleitung Seite 28

1 Inserting the batteries
2 batteries are provided as standard and must be inserted as
described below, respecting the + and - polarities indicated in the
box.
When the batteries have to be replaced, the battery symbol flashes
in the display ( ).
4
First initialisation
"
"
Use the batteries provided or commercially available
alkaline batteries LR6 AA 1.5V. Do not use rechargeable
batteries.
After inserting the batteries, a message "init" appears in the display
giving you time to synchonize the parameters for the transmitter /
receiver box if pairing is done.
See chapter: Pairing (to be done in the boiler room when
installing for the first time)
RS 100 R
#
#
#
19/07/07 - 300010273-001-A