OERTLI RS 100 R Bedienungsanleitung Seite 27

GMR 1000 Condens
Tilt the flap on the control panel.
Open the protective hood.
Connect the connector from the transmitter/receiver box to the terminals marked S.AMB..
GVX 100-24 Condens
Lift the flap.
Turn the screw on the front panel of the command box.
Tilt the control panel forward.
Connect the connector from the transmitter/receiver box to the
terminals marked BUS.
Leave the TAM connector in place.
The remote control/boiler liaison cable must be separated by
at least 10 cm from cables carrying 230 V.
19/07/07 - 300010273-001-A
Connecting the box
Switch off the mains electricity supply before carrying out
any work. Electrical connections must be made by a
qualified professional
RS 100 R
3