Palazzetti ALBA THERMO Allgemeine Angaben-Hinweise-Installation-Wartung Seite 31

in the upper position; this allows for signi cant savings
since the ame heats the plate and the cooking oven
more quickly.
The heater-cooker is delivered with the grill at the bottom;
to position it in the upper position, proceed as follows:
• Remove the upper plate and open the re door and the
ash box door.
• Push the grill all the way back , next lift the ash box grill
and lift it off and out of its seat.
• Position the gill in the upper position in the opposite
direction to which it was in the lower position.
The grill seat consists of 4 supports which are welded to
the front and rear of the combustion chamber (Fig. 3.1,
component 23). The grill should be inserted obliquely
into the supports; it should rst be placed on the rear
supports and then on the front ones. To position the grill
in the best possible way, it is preferable to move it back
and forth in order to adapt it to the supports.
INSTALLAZIONE
004773902 - 01/2018 - PALAZZETTI - PN - Italy
Fig. 7.2
Fig. 7.2.1
3
Fig. 7.2.2
2
1
2
1
Fig. 7.2.3
3
15