D - Using The Product; Identify And Speak To The Visitor; Activate The Intercom Panel From The Monitor; Opening An Electric Lock And An Automatic Control System (Optional) - avidsen YLVA 3+ COMPACT Bedienungsanleitung

COLOUR VIDEO INTERCOM 4"

1 - IDENTIFY AND SPEAK TO THE VISITOR

The visitor presses the intercom panel button:
The chime sounds through the monitor's speaker
and the intercom panel's video camera is activated.
If the visitor is positioned within the camera's field of
vision, their image will appear on the monitor for 30
seconds. After 30 seconds,
the monitor will return to sleep mode.
To speak with the visitor, press the
end the conversation and deactivate the intercom
panel, press the
button.
2 - ACTIVATE THE INTERCOM PANEL FROM
THE MONITOR
To identify a visitor without them knowing they are
being observed or to simply look outside, press the
button: the view from the intercom panel will
then appear on the screen for 60 seconds.
If you wish to communicate directly with the outside,
press once on the
video camera is displayed.
This particularly useful feature allows you to observe
the visitor, even if they haven't pressed button 7 on
the intercom panel.
3 - OPENING AN ELECTRIC LOCK AND AN
AUTOMATIC CONTROL SYSTEM (OPTIONAL)
If the device is equipped with an electric lock and/
or an automatic control system (see "Connection"
button. To
button when the external

D - USING THE PRODUCT

paragraph), press the
the button (for the automatic control system) to
let a visitor enter.
Warning: the screen
communication so that the dry contact and powered
output controls can operate. If the screen is off, it
must be switched on using the button
the conversation with the button

4 - INTERCOM FEATURE

You can initiate internal communication with the
secondary monitor (if present) using the intercom
feature. This feature can be used when the monitor
is in sleep mode: Press the
secondary monitor. You can call the secondary
monitor and vice versa. You can answer by pressing
the button and communicate for a maximum of
120 seconds. The terminal will then return to sleep
mode.
Communication with the intercom panel has priority.
button (for the lock) or
must be on and
, activate
.
button on the
17
in
EN