D - Using The Product - avidsen BambooView 112282 Installationsanleitung

1 - IDENTIFY AND SPEAK TO THE VISITOR
The visitor presses the intercom panel's call
button:
The chime sounds through the monitor's speaker
and the intercom panel's video camera is activated.
If the visitor is positioned within the camera's field
of vision, their image will appear on the monitor for
120 seconds. After 120 seconds,
the monitor will return to sleep mode.
To speak with the visitor, press the
end the conversation and deactivate the intercom
panel, press the button.
2 - ACTIVATE THE INTERCOM PANEL FROM
THE MONITOR
To identify a visitor without them knowing they are
being observed or to simply look outside, press the
button: the view from the intercom panel will
then appear on the screen for 60 seconds.
If you wish to communicate directly with the
outside, press once on the
external video camera is displayed.
This particularly useful feature allows you to
observe the visitor, even if they haven't pressed
button 7 on the intercom panel.
If an additional camera or intercom panel are
connected, they may be viewed by pressing the
button
3 - OPENING AN ELECTRIC LOCK AND AN
AUTOMATIC CONTROL SYSTEM (OPTIONAL)
If the device is equipped with an electric lock and/
or an automatic control system (see "Connection"
paragraph), press the
the
to let a visitor enter.
button. To
Warning: the screen must be switched on before
the dry contact and powered output controls can
function. If the screen is off, it must be switched on
using the button
4 - INTERCOM FEATURE
You can initiate internal communication with the
secondary monitor (if present) using the intercom
feature. This feature can be used when the
monitor is in sleep mode: Press the
the secondary monitor. You can call the secondary
monitor and vice versa. You can answer by
pressing the
button when the
maximum of 120 seconds. The terminal will then
return to sleep mode.
Communication with the intercom panel has
priority.

D - USING THE PRODUCT

button (for the lock) or
button (for the automatic control system)
button and communicate for a
button on
17 EN