Bosch FlexiDomeXT+ Installationshandbuch Seite 21

FlexiDome
XT+
NIGHTSENSE* AUTO
EXIT
* Only in color version of camera.
Note
If NightSense™ is active, some noise or spots may appear in the picture.
This is normal camera behavior.
If a color camera is in monochrome mode, all color related menu items are
disabled and cannot be accessed.
Color submenu*
Function Selection
WHITE ATW
BALANCE AWB HOLD
RED gain** -5 - 0 - +5
BLUE gain** -5 - 0 - +5
EXIT
* Only in color version of camera.
** It is only necessary to change the white point offset for special scene
conditions.
Bosch Security Systems | 2008-08 | V1.1
| Installation Manual
Nightsense™ extends the low-light
FORCED performance of the camera.
OFF •In AUTO mode, the camera automatically
•In FORCED mode, the camera remains in high-
Exit the menu
Description
•ATW: Auto tracking white balance allows the
•AWB HOLD: Puts the ATW on hold and saves
Offset factory white point alignment (reducing
red introduces more cyan).
Offset factory white point alignment (reducing
blue introduces more yellow).
Exit the menu
inches to monochrome in low-light conditions.
sensitivity monochrome operation.
camera to constantly adjust for optimal color
reproduction.
the color settings.
EN | 21