System Recovery - Getac V110 Bedienungsanleitung


Turn off the computer power when clean-
ing the display. Cleaning the display with the
power on may cause improper opera-
tion.

Do not use excessive force on the display.
Avoid moving the computer while holding the
display or twisting the display. Avoid placing
objects on top of the display as this may cause
the glass to break thereby damaging the display.

Using the touchscreen during low tempe-
o
rature (less than 5 C) may cause a slower
response time. This is normal. A normal
response time may be restored upon re-
turning to room temperature.

When there is a noticeable discrepancy in the
placement of the stylus on the screen and the
indicated position of the onscreen pointer, use
the calibration utility to reca-
librate the touchscreen display.

System Recovery

Windows 8 Models
If you're having problems with your Windows 8
computer, you can try one of the below actions.

Restore your computer to an earlier point in
time.

Refresh your computer without affecting your
files.

Remove everything and reinstall Windows.
For more information, see the User's Manual.
Windows 7 Models
A "System Recovery" tool allows you to restore
the Windows 7 system to the factory state.
To run System Recovery:
1. Connect the AC adapter.
2. Turn on the computer. During system startup
when the Getac logo screen appears, press Ctrl
+ Alt + F2 keys for four seconds.
3. In the screen that appears, select Recovery to
start the recovery process.
4. The progress bar shows the percentage
completed. When it reaches 100%, the system
turns off.
5. Turn on the computer. The Windows setup
wizard starts. Follow the onscreen prompts to
continue.
6. When the system restarts, the installer screen
appears. The installer will perform system
hardware detection and driver installation.
7. When completed, the system restarts and
displays Windows desktop.
More Information
For complete information of the product, refer to
the User's Manual (in PDF format)
on your Window's desktop or Driver Disc.
You can download the latest manual and drivers
by accessing the Getac web link at
http://www.getac.com  Support  Download.
5