Getting Started - Getac V110 Bedienungsanleitung

Getting Started

Unpacking
V110 notebook computer
AC adapter AC power cord
Battery pack x 2 Screen cleaning cloth
Carrying strap
Stylus Tether
Driver disc Document(s)
NOTE: This packing list applies to
standard models. Select models may
have different items.
Installing the Battery Packs
The computer supports two battery packs (one at
the left and one at the right side).
1. Slide the cover latch toward the unlocked
position ( ) (  ) and then lift up the tab
( ) to release the cover.

2. Noting the orientation, insert the battery pack
all the way into the slot.
3. Hold the battery latch and slide it toward the
left to the locked position. (Never use the
ribbon strip to pull the battery latch.)
4. When closing the cover, push the tab downward
until the cover clicks into place and then slide
the latch toward the locked position (
CAUTION: Make sure the latch is
correctly locked, not revealing the
underneath red part.
5. Proceed with the other battery pack.
Connecting to AC Power and Starting Up
The first time you use your computer, use the AC
adapter.
1. Plug the DC cord of the AC adapter to the
power connector of the computer (
2. Plug the female end of the AC power cord to
the AC adapter and the male end to an electrical
outlet ( ).

3. Pull loose the cover latch (
the clamp ( ). Lift up the cover (

4. Press the power button (
5. The Power Indicator lights green. The Windows
operating system should start.
Charging the Battery
To charge the battery, connect the AC adapter to
the computer and an electrical outlet. The Battery
Charge Indicator ( ) on the computer glows
amber to indicate that charging is in progress. When
the battery is fully charged, the Battery Charge
Indicator glows green.
Taking a Look at the Computer
CAUTION: You need to open the protective covers to access th
devices inside. When not accessing a connector or device, ma
the cover completely for water-, dust-, and fire-proof int
computer. (Engage the locking mechanism if existing.)
).
).

 ) and release
).

) to start up.
1